Wisi OE 01 Manual De Usuario página 14

First use:
• Connect the grounding cable to the dedicated grounding connection (2)
• Push the power supply to the power supply socket of OE01 (3)
• Plug the power supply into the 230V socket
• Connect the HDMI output of your video source with the HDMI input (4)
• Set the desired output channel via the rotary-push button (5)
• Insert the Encoder Modulator into your distribution network by using the RF output (7)
• Existing terrestrial oder cable TV channels can be combined via the RF Bypass (6)
Indication:
All information of the Encoder Modulator is shown at the integrated Display (1)
The Power-Led indicates the availability of the DC power (permanently glowing)
Software settings
All settings are done via the rotary-push button:
• Push the button for 2s to enter the basic configuration.
• Push the button to confirm your selections.
• When rotating the button you scroll through the different screens and para-
meters.
Important remark: At the end of the programming process, to save the recent changes, the menu
point "Save & Exit" has to be selected.
Before entering the menu, the modulator already gives you on the start screen the most
important parameters of the modulator :
• The first row indicates if a HDMI signal is detected and which resolution. If there is no resolution
shown, the HDMI signal is not detected by the Encoder Modulator.
• The second row shows the selected output modulation and output frequency.
© WISI Communications GmbH & Co. KG 14