Wisi OE 01 Manual De Usuario página 15

HDMI MODULATOR (REF. 8201 & 8202)
Basic configuration
In this part we will make the basic configuration to start using the HDMI Encoder Modulator. In most
2.1. Basic configuration
cases, this will be sufficient to configure the product. Only in special cases, where detailed settings
have to be set, you will have to use the advanced configuration. See the next paragraph.
In this part we will make the BASIC CONFIGURATION to start using the HDMI Modulator. In
The best way to configure the product is to follow the menu step by step. Some of the settings have
most cases, this will be sufficient to configure the product. Only in special cases, where
effect to one or more of the following settings. This means for instance, that step1 (Country) will
detailed settings have to be set, you will need to use the advanced configuration. See the
next paragraph.
cancel step 2 (Output type). If you have set for instance the output type to ATSC-T and then you go
back to country and configure to be France, ATSC-T will be changed into DVB-T (as ATSC is not The best way to configure the product is to follow the menu step by step. Some of
the settings have effect on 1 or more of the following settings. This means for instance that
supported in France).
step1 (Country) will overrule step 2 (Output type). If you have set for instance the output
type to ATSC-T and then you go back to country and configure this to be France, ATSC-T
will be changed into DVB-T (as ATSC is not supported in France).
*
For ISB-T configuration, please see Appendix A (p. 15 of this manual)
15
9
wisigroup.com