Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Precautions
Please
take time to read these safety precautions carefully before
connecting your machine to the power supply.
-
Danger of electric shock! Never immerse the machine in water or any
other liquid.
-
Connect only to a properly grounded power point.
-
Always pull out the power plug before:
o Relocating the maker.
o Cleaning or maintenance.
o Long periods of disuse.
-
Never clamp or run the power cable over sharp corners or edges.
-
Danger of electric shock! Damaged power cables may only be replaced
at the customer service center.
-
Danger of electric shock! Never touch the power lug/socket/cable or the
maker with damp or wet hands.
-
Never unplug by pulling out the power cable; always remove the plug.
-
If you need an extension cable, make sure it is suitable for your maker
and lay the cable to avoid accidents.
-
Danger of burning! Never move the maker during operation!
-
Do not use the maker in case of:
o Faulty operation.
o Damaged power cable.
o After falling or other damage.
o In such cases immediately have the maker checked and repaired,
if necessary, at the customer service center.
-
The maker must be located following requirements:
o Choose a dry, stable and leveled surface not immediately
underneath the power point. at least 60 cm away from the
washbasin and taps.
o Never place over flammable surfaces or equipment.
o Never place the maker or power cable within 50 cms from hot
surfaces.
o Never cover the maker during operation.
-
Keep children away from the maker during operation.
-
Only use the maker in dry rooms.
-
Danger of tripping! Do not let the power cable hanging.
-
Pull out the power plug and allow the machine to cool down completely
before cleaning and or maintenance.
-
To prevent damage, never use replacement parts or accessories not
recommended by the manufacturer.
4
Publicidad
