Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING YOUR UNIT
Operation buttons and display area diagram
Steps for operating the ice-making process
1. Powering on: Plug in the power cord. The
display window. Press the ON/OFF button on the control panel. The
machine will start to make ice when the water supply pipe adds enough
water to reach the standard level on the water tank through the
electromagnetic water valve. Then, the
solidly in the display window and the
ambient temperature will be displayed in the upper left of the display
window. "80F" means the ambient temperature is 80℉. Several minutes
later, the ambient temperature display area will display a flashing number.
The flashing number "10M" means the unit needs 10 more minutes to
finish the ice making cycle.
2. After every ice making cycle, the unit will enter the de-icing process. The
symbol will flash. the external pipe will add water to the water tank
through the electromagnetic valve, and the arrow on the
flash until the water reaches the standard level. Then, the
extinguish, and the unit will enter the next ice-making cycle. When the
water cannot be filled to the standard level due to a lack of water supply,
the symbol will be solidly illuminated, and the unit will stop working. After
a water shortage occurs, the unit will need to be restarted. Otherwise, the
unit will restart automatically after 15 minutes.
Note: Each ice making cycle is approximately 11-20 minutes. The cycle
length will vary depending on the ambient temperature and water
www.newair.com
symbol will flash in the
symbol will be illuminated
symbol will rotate. The
symbol will
symbol will
EN
21
Publicidad
