nvent SPECTRACOOL S10 1000 Manual De Instrucciones página 11

CONTROLLER STATUS INDICATION
The display has numerous symbols to indicate the various controller functions such as cooling, heating, alarming,
evaporator fan, and heating. Indicators (icons) are steady illuminated on screen when active.
SYMBOL COLOR
Red
White
White
White
SYMBOL COLOR
C White
F White
Main Field
White
Line 1
Main Field
Line 2 Orange
SYMBOL COLOR
White
White
White
White
White
White
89159224
Alarm - active when alarm is detected
Keypad Select – access to passcode , hold 5 sec to turn unit ON/OFF,
parameter menu, parameter setting, write or save to EEPROM, and hold
for 3sec to return to main screen
Keypad Up – navigate to previous parameter and increasing parameter
Keypad Down – navigate to next parameter and decreasing parameter
variable, all inputs, unit status.
When operating temperature in degrees Celsius
When operating temperature in degrees of Fahrenheit
Display inlet temperature
Display outlet temperature in standalone mode if outlet sensor is present
Displays device ID for primary-secondary mode up to 10 units, 1:10 ...
10:10 or lead-lag mode up to 2 units, 1:2... 2:2
ICON INDICATION
Compressor Running
Evaporator Running
Electric heater ON
Primary and/or lead
controller
Freeze control
Power ON
© 2022 nVent
Figure 1: Display
KEYPAD
ICON INDICATION
variable
MAIN FIELD
ICON INDICATION
ICONS
Flashing while waiting for compressor to turn ON
Steady ON while compressor is running
ON
ON
ON
Compressor and Condenser fan OFF while illuminated
ON
ICON STATUS
Flashing when alarm
is detected
ON only when
reviewing parameters
ICON STATUS
ICON STATUS
ON
ON
ON
ON
ON
ON
- 11 -