Publicidad
Idiomas disponibles
Idiomas disponibles
DISPLAYING AND CHANGING PROGRAM SETTINGS
TO VIEW OR ACCESS THE SETTINGS
To access folder menus.
1. Press
button to display passcode screen, the screen displays PSd on line 1 and 0000 on line 2.
2. Press
button to access to passcode , the first digit of 0000 is flashing and press 3 more times until the
last digit of 0000 flashes.
3. Press
arrow two times to change the 0 to 2. Press
NOTE: To exit the security level to the main screen wait one minute with no action or Press
arrow until LOG Out message displays, then press
TO CHANGE A PARAMETER SETTING
1. Once in the folder menu navigate to the desired setting to be changed using the
and
button to access a menu or parameter.
2. To change a parameter Press
3. Press
/
arrow to the desire value.
4. Press
button to save the setting and the screen will revert to the parameter mnemonic.
NOTE: IF
BUTTON IS NOT PRESSED, THE NEW SETPOINT IS NOT SAVED.
To exit the parameter settings to the main screen wait one minute with no action or Press
arrow few times until ESC displays, then press button to return to UoF screen. From
the UoF screen Press
button to return to the main screen.
Selecting ESC returns to folder menu
Selecting LOG out returns to main screen
89159224
button and parameter value will begin to flash.
arrow few times until LOG Out message displays, then press
© 2022 nVent
for access to folder menus.
button.
arrow to scroll
- 13 -
Publicidad
