Daewoo DAS80 Guia Del Usuario página 12

4. CHAPTER 4 SWEEPER TROUBLESHOOTING
effect is not
obvious
Pump works, no
spray
Main brush fuse blown
Main brush motor burned out
Motor thermal overload
start
DC contactor burned out
Side brush fuse blown
Side brush motor burned out
t
Motor thermal overload star
DC contactor burned out
Blower fuse blown
Fan motor burned out
DC contactor burned out
Motor thermal overload start
Replacing The Dc Contactor
Dc Contactor Burned Out
Wait 5-10 Minutes, A�er The Motor Cools
Motor Thermal Overload
Down, You Can Reset And Start.
Start
Water Pump Fuse Blown Replace The Water Pump Fuse
Water Pump Motor Burned
Replace The Water Pump Motor
Out
Remove The Nozzle And Rinse The Nozzle With
Nozzle Is Clogged
Clean Water
Electric Water Valve Burnt
Dc48/dc24v Converte
Burnerd Out.
12
Replace the main brush fuse
Replace the main brush motor
Wait 5 - 1 0 minutes, a�er the motor cools
down, you can reset and start
Replacing the DC Contactor
Replace the side brush fuse
Replace the side brush motor
Wait 5 - 1 0 minutes, a�er the motor cools down,
reset and start
Replacing the DC Contactor
Replace fan fuse
Replace the fan motor
Replacing the DC Contactor
Wait 5 - 1 0 minutes, a�er the motor cools down
, can reset and start
Remplace Electric Water Valve
Replace The Coverter