QNAP QSW-M2106R-2S2T Guía De Instalación Rápida página 4

LED Behavior
QSW - M2106PR-2S2T
i
1 2 3
LED Status
Green
Flashes green
System Status
Flashes red
Off
Green
PoE Status
Flashes red
Off
Green
Fan Status
Flashes red
Green
Flashes green
2.5GbE RJ45 (Left) Amber
Flashes Amber
Off
Green
2.5GbE RJ45 (Right)
Flashes Amber
Off
Green
Flashes green
Amber
10GbE RJ45 (Left)
Flashes Amber
Off
Green
10GbE RJ45 (Right) Flashes Amber
Off
Green
10GbE SFP+ (Left) Flashes green
Off
Amber
10GbE SFP+ (Right)
Flashes Amber
Off
1 / 2 3 / 4 5 / 6
i
7 8 9
4 1 5 2 3
Description
The device is ready.
• The device is being initialized.
• The firmware is being updated.
Note : When updating the firmware, do not remove the power
cord or USB cable, and do not force-exit the application.
• The device is being reset.
A fatal device error occurred.
The device is powered off.
The PoE status is normal.
A fatal PoE error occurred.
There is no PoE connection.
The system fan status is normal.
A fatal system fan error occurred.
The link speed is operating at 2.5 Gbps.
Data is being transmitted.
The link speed is operating at 1 Gbps or 100Mbps.
Data is being transmitted.
There is no network connection.
The PoE status is normal.
A fatal PoE error occurred.
There is no PoE connection.
The link speed is operating at 10 Gbps.
Data is being transmitted.
The link speed is operating at 5 Gbps, 2.5 Gbps, 1 Gbps, or
100Mbps.
Data is being transmitted.
There is no network connection.
The PoE status is normal.
A fatal PoE error occurred.
There is no PoE connection.
The link speed is operating at 10 Gbps.
Data is being transmitted.
There is no network connection.
The link speed is operating at 1Gbps.
Data is being transmitted.
There is no network connection.
LED Behavior
1 / 2 3 / 4 5 / 6 1 / 2 3 / 4 5 / 6
QSW - M2106R-2S2T
i
10 7 8 9
Reset
6 4 1 5 2
LED
System Status
2.5GbE RJ45 (Left)
2.5GbE RJ45 (Right)
10GbE RJ45 (Left)
10GbE RJ45 (Right)
10GbE SFP+ (Left)
10GbE SFP+ (Right)
1 / 2 3 / 4 5 / 6
i
10 7 8 9 10
Reset Reset
6 3 1 4 2
Status
Green The device is ready.
• The device is being initialized.
• The firmware is being updated.
Note : When updating the firmware, do not remove the
Flashes green
power cord or USB cable, and do not force-exit the
application.
• The device is being reset.
Red A fatal device error occurred.
Off The device is powered off.
Green The link speed is operating at 2.5 Gbps.
Flashes green Data is being transmitted.
Off There is no network connection.
Amber The link speed is operating at 1 Gbps or 100 Mbps.
Flashes amber Data is being transmitted.
Off There is no network connection.
Green The link speed is operating at 10 Gbps.
Flashes green Data is being transmitted.
Off There is no network connection.
The link speed is operating at 5 Gbps, 2.5 Gbps, 1Gbps, or
Amber
100Mbps.
Flashes amber Data is being transmitted.
Off There is no network connection.
Green The link speed is operating at 10 Gbps.
Flashes green Data is being transmitted.
Off There is no network connection.
Amber The link speed is operating at 1 Gbps.
Flashes amber Data is being transmitted.
Off There is no network connection.
2.5GbE PoE+
7 8 9 10
Reset
3 4
Description