— PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS
Before getting started, let's make sure this product is perfect for you!
This mount is designed to support only Sonos® Era 300™ speakers.
CAUTION:
Avoid potential personal injuries and property damage!
•
Check your speaker owner's manual to see if there are any special requirements for mounting your speaker.
•
Please read through these instructions completely to be sure you're comfortable with this easy install process.
•
Do not use this product for any purpose not explicitly specified by manufacturer.
•
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
•
The wall must be capable of supporting five times the weight of the speaker and mount combined.
•
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at +1 (800) 359-5520 (EMEA: +31 (0) 495 580 852; UK: +44 (0) 800 056 2853).
Speaker Weight Limit
DO NOT EXCEED
Tools
Needed
2
IMPORTANT SAFETY INSTRUCTIONS
Electric Drill
Pencil
Level
Screwdriver
10 lbs.
(4.5 kg)
1/8 in.
(3 mm)
Wood
Stud Finder
Awl
Drill Bit
3/8 in.
3/8 in.
(10 mm)
(10 mm)
Masonry
Drill Bit
Drill Bit