EZiclean Air pure 200i Manual De Usuario página 11

Modes
ON / OFF
Press the ON/OFF button to switch the machine on and off.
By default, the speed is the lowest and the child lock is deactivated.
SPEEDS
Then press the SPEED button to change the power of the appliance. Press as many times as
necessary in the following order: LOW -> HIGH -> Auto -> Sleep
LOW power is the minimum speed.
HIGH power is the maximum speed.
AUTO power allows your air purifier to determine the power to adopt according to the air particles
it encounters.
The SLEEP setting turns off all the lights in the unit while continuing to operate at low speed.
IONISE
Press the IONISE button to activate the negative ions.
Press it again to stop.
The negative ions charge particles in the air (such as dust, viruses or bacteria). These particles clump
together around the negative ions, making them larger and easier to catch, but more importantly,
making any virus or bacteria that may become trapped in the clump harmless. Producing large
quantities of negative ions therefore makes it possible to adsorb the particles present in the air and
also to eliminate odours.
REPLACE THE FILTERS
When you use your air purifier, a counter will start to ensure that it is working properly. After 2000
hours of operation, the filter indicator will flash and a beep will sound.
To replace the filters, simply order a new kit from www.eziclean.com. Then remove the bottom
cover of the unit, remove the old filter and install the new filter.
Once the filters have been replaced, press and hold the FILTER button for 3 seconds so that it stops
flashing and the beeping stops.
DIFFERED ALLUMAGE
Press the DIFFERED ALLUMAGE button to choose the time you want to turn on your device. You can
delay the ignition of your air purifier by 1/2/4/8 hours.
Air quality
When turned on, your air purifier emits a light that tells you the quality of your air:
Blue : Perfect / Green : Good / Purple : Average / Red : Poor