8110 Automatic Coffee Machine
Instruction Manual
Page 13 of 18
III. MODE SELECTION
The machine has two different setting: default setting, ECO mode and speed mode. In ECO mode,
the appliance helps to save more energy. In speed mode, the user can make their coffee faster than
in default setting.
Light on
Pre-brewing
*
Auto shut off time
Cup Volume memory
*Note: The pre-brewing function moistens the grounded beans in the brewer with a small amount of
water before full extraction. This expands the coffee grounds to build up a greater pressure in the
brewer which help extraction of all the oils and full flavor from the grounded beans.
1. When the machine is in standby, press and hold
2. The indicator
in different settings:
In ECO Mode
In Speed Mode
In Default Setting
3. Press the hot water button for ECO mode, strong coffee button for speed mode and mild coffee
button for default setting. Two beep sound will be heard indicates that the mode is being
selected. (Note: If you are pressing the relative lighted on button for each mode, the machine
will not respond).
4. If you want the setting to remain unchanged, press
to return to standby.
E. CLEANING & MAINTENANCE
I.
DESCALING
When
flashes, it means that the appliance requires descaling. The appliance will remain in
the best condition if this function is performed at least once a month or more regularly depending
on the hardness of water used. It is also suggested that to
1. Fully fill the water tank.
2. Add one pack of cleaning agent included in the box to the water tank.
IMPORTANT: Do not use vinegar or other cleaning agent to do descaling of this appliance. The
cleaning agent might damage the appliance.
3. Plug in the appliance.
Speed Mode
Yes
No
30mins
Yes
will flash and the following will be displayed
Hot water button
Light on
Flashing
Flashing
Default Setting
Yes
Yes
20mins
Yes
for 5 seconds.
Strong coffee button
Flashing
Light on
Flashing
again or wait 5 seconds for the machine
ECO Mode
No
Yes
10mins
Yes
Mild coffee button
Flashing
Flashing
Light on