Publicidad
Idiomas disponibles
Idiomas disponibles
8110 Automatic Coffee Machine
Instruction Manual
Page 15 of 18
III. MANUAL RINSING
You can perform a manual rinsing cycle to clean the coffee spout after use. It is also suggested to
perform a manual rinsing if the appliance has not been used for a long period of time.
1. In stand-by mode, press and hold the
2. Hot water button will be flashing. The coffee spout will then dispense a small amount of water
which is used for the rinsing.
Danger: The water exiting the dispensing spout is hot and is collected in the underlying drip tray.
Avoid contact with splashes of water.
3. After rinsing, the appliance will return to the standby condition.
IV. CLEANING THE APPLIANCE
1.
Disconnect the power cord from the mains supply outlet.
2.
Pour all the water contained in the internal and external drip trays
3.
Use a damped cloth or non-scratching cleaner to clean the water stains on the appliance.
IMPORTANT: Never use any abrasive, vinegar or descaling agents not included in the box to clean
the appliance.
V. Cleaning coffee powder outlet
Coffee powder may stick on the wall of powder outlet for appliance after used a long period of
time. It is suggested to clean the outlet by following steps to ensure that coffee powder can come
to brewer.
1. Push the service door recess area
2. Take out the service door
button and the hot water button
.
Publicidad
