Trust 18165 Guía De Instalación Rápida página 4

Bluetooth Audio Speaker - USER'S MANUAL
Installation
A Volume -
1
B Play/ Pause
C Volume +
D LED indicator: Blue/Red flashing
Blue constant
E On/ Off switch
F 3.5mm Audio input
G Power Adapter input
H Battery compartment
I Power adapter
J Audio cable
- Connect the power adapter to the wall socket.
2
- Connect the power adapter to the power adapter input 'G'.
- Power on the speaker by switching the power switch 'E' on the rear of the speaker.
- Press and hold the play/ pause button for 5 seconds.
- The LED indicator 'D' will start flashing Blue/ Red alternating (paring mode).
The speaker can also be powered by 4 AA batteries. The battery compartment 'H' is located at the bottom of
the speaker.
If the LED indicator is not flashing blue/ red alternating. Press and hold the play/pause button for 5sec.
If a passcode is requested during the configuration of the device Use '0000'.
Pairing mode
Connected
2