RS Pro RS-8920 Manual De Instrucciones página 4

Pressure and Flow Meter / English
4.Display Elements
1. min : sec or hour : min Display.
2. Pressure, Velocity, Flow or temperature modes are active
3. Primary Display.
4. Units of air velocity.
5. Units of pressure.
6. The indication of meter communicating to PC.
7. Auto Power Off mode indicators.
8. Duct Shape choices.
9. Low battery indicator. Replace the battery as soon as the low battery indicator appears.
10. Data Hold indicator.
11. The units of H, W or D.
12. Entering or exiting setup mode.
13. Indicates that a stored sample (or all samples) is about to be deleted from memory.
14. The sample memory is being accessed and the number of samples.
15. Annunciators showing that sample memory is being accessed.
16. REC, MAX, MIN and AVG indicators.
17. Temperature units of primary display.
18. Units of air flow.
19. Temperature units of secondly display.
20. Digits for temperature and time.
4
5.Changing Setup Options
Use Setup to chose duct shape and set the duct parameters. Sleep mode, Max/min/avg
mode menu setting and clear memory. The thermometer stores the settings in its memory.
5-1.Setup Options
Option Menu item
Duct dimension units Unit
Duct Shape and parameters Duct Shape
Auto Power Off mode SLP
menu setting ENU
clear Memory Mem clear
5-2.Entering or Exiting Setup
When the thermometer is in Setup mode, the display shows SETUP.
Press "Setup " button for 2 seconds start or exit Setup.
5-3.Changing a Setup Option
• Press "Unit " or "Unit " to scroll to the setup option you want to change.
• Press "Avg/Rec" to indicate that you want to change this setting.
• Press "Unit " or "Unit " until the setting you want to use appears on the display.
Press "Avg/Rec" to store the new setting in memory.
Notes: Setup is disabled in MIN MAX/AVG mode.
5-4.Duct dimension units Setting
• When the meter is in Setup mode, Press "Unit " or "Unit " to scroll to the duct
dimension units setup option.
• Press "Avg/Rec" button. It shows "in" or "cm" on the display.
• Press "Unit " or "Unit " to scroll to the setup option you want to change.
• Press "Avg/Rec" to store the new setting in memory.
Pressure and Flow Meter / English
Settings
Set duct dimension units in or cm
set area of measuring air flow
auto off or on
1, 2,or 3
Yes or No
5