Publicidad
Idiomas disponibles
Idiomas disponibles
RRE 510 A 810 A 1010 A 1310A 1510 A 1810 A
This heater can be used freestanding or wall-mounted.
Free-standing:
1. When used in freestanding position, it must be standing in a vertical position. Do not place the
heater on instable surfaces, such as bed, carpets etc. and do not use the heater on uneven position,
where the heater can tip-over-otherwise there is a risk of fire.
2. Allow ample space around the heater. A safe area to be left free is 15 cm at the sides, and 20 cm at
the front
How to install the feet:
Insert the edges of the bottom of the radiator into the feet support as show in (see below figure 1, fig.1.1 and
form) as below. You will hear a click to indicate that the installation was a success.
IMPORTANT: In order to avoid material damage, if you choose to mount your transmitter on the wall, be
ATTENTION: When installing the appliance on its support feet, place it on a surface that supports high
sure to follow the instructions on the safety distance between the device and the surface. If you install
temperatures.
the device on its support feet, make sure that the surface can withstand temperatures of up to 90°C.
Fig. 1
Model
RRE 510 A
RRE 810 A
RRE 1010 A
RRE 1310 A
RRE 1510 A
RRE 1810 A
WALL MOUNTING:
1. Follow the minimum safety distances for installation.
INSTALLING INSTRUCTIONS
fig.1.1
Feet Position
First feet
Second feet
1
3
1
5
1
6
1
7
1
8
1
10
28
Publicidad
