Sector 230 Manual De Instrucciones página 7

HOW TO USE THE STOPWATCH FUNCTIONS
• The stopwatch can measure up to 29'59" in one-second increments.
• When the measurement reaches 30 minutes, the stopwatch automatically stops counting.
STOPWATCH minute hand
STOPWATCH second hand
• The stopwatch second hand is capable of timing 30 minutes. (60 seconds x 30 times)
• The stopwatch minute hand is capable of timing 30 minutes.
• Whether the stopwatch hands return to the "0" position in a clockwise rotation or in a
counterclockwise rotation is decided depending on the elapsed time the stopwatch has
measured.
* Before using the stopwatch, be sure to check that the crown is set at the normal position and that the
stopwatch hands are reset to the "0" position.
Note: If the stopwatch hands do not return to the "0" position when the stopwatch is reset to "0", follow the
procedure in "Stopwatch hand position adjustment".
Standard Measurement
START
START
Accumulated Elapsed Time Measurement
STOP
RESTART
START
Note: Restart and stop of the stopwatch can be repeated by pressing Button "A."
Split Time Measurement
SPLIT
START
SPLIT RELEASE
Note: Measurement and release of split time can be repeated by pressing Button "B."
RESET
Measurement of Two Competitors
START
STOP RESET
STOP RESTART
SPLIT
SPLIT RELEASE
FINISH TIME 2nd
OF 1ST COMPETITOR
COMPETITOR FINISHES COMPETITOR
STOP RESET
STOP RESET
FINISH TIME
RESET
OF 2nd