1.3.7 Internal Audio Connectors
1.3.8 Floppy and IDE Disk Drive Connectors
If you encountered problems while using an ATAPI CD-ROM drive that is
set in Master mode, please set the CD-ROM drive to Slave mode. Some
ATAPI CD-ROMs may not be recognized and cannot be used if
incorrectly set in Master mode.
Quick Setup Guide
CD-in
1 Left audio channel
2 Ground
3 Ground
4 Right audio channel
TAD
1 Modem-out (from modem)
2 Ground
3 Ground
4 Modem-in (to modem)
FDD
IDE
1
15