Turning The Power On And Off; Led Displays And The Camera Status - Canon VC-C50i Manual De Instrucciones

Before You Use the Product

Turning the Power ON and OFF

The VC-C50i/VC-C50iR camera does not have a power switch. You can switch the camera on
by plugging the AC adapter into a wall outlet. When power to the camera is switched on, the
LED on the camera turns green. If the monitor is switched on, an image appears on the
screen.
to AC outlet
AC cable
● Whenever you turn the camera on, the first use of the PC or wireless
NOTE
● Never touch the camera head during initialization. This could prevent
● Wait at least five seconds before turning the power back on after shutting it

LED Displays and the Camera Status

Green
Blinking green
Orange
Blinking orange
Red
Off
18
AC adapter
controller to control the camera initializes the camera head position.
(Initialization takes several seconds.) The LED on the camera flashes
green (at 1-second intervals) during initialization.
successful initialization and cause faults.
off. Turning it on too quickly may result in a malfunction. Observe the
precautions given in "a Safe Use of Equipment/a IMPORTANT SAFETY
INSTRUCTIONS" (→ P.7–9).
LED Display
At 0.1-sec. intervals
At 0.5-sec. intervals
At 1-sec. intervals
At 0.1-sec. intervals
At 0.5-sec. intervals
Camera
Camera Status
Camera is on. (→ P.26)
Wireless controller button being used.
Storing or restoring a preset (→ P.25), or displaying
a setting menu. (→ P.27)
Camera head position initialization in progress.
Individual camera operation in progress and this camera
is not selected. (→ P.36)
Camera is not selected for individual operation and is
being controlled from the wireless controller. (→ P.36)
The camera is being selected or deselected for
individual operation. (→ P.36)
Camera is off. (→ P.26)
Power is off. (Power is not connected to the camera.)
Monitor