Direct Access To Setpoints Value; Return To Default Configuration; Access To Lock-Out Configuration Menu - Ditel JR-D Manual Tecnico

Direct access to Setpoints value

Pro
SEt1
00.00
SEt2
00.00

Return to default configuration

3s

Access to lock-out configuration menu

8888
3s
CodE
0000
SERIE KOSMOS
If 2RE output option is installed, it is possible to access to Setpoints value
configuration without having to enter main menu.
To access this submenu, from RUN mode and after ENTER key is pressed, simply
press UP key while "Pro" is displayed.
FIRST SETPOINT VALUE:
SEt1: Setpoint 1 value indication.
00.00: Value entering in counts within available model display range.
SECOND SETPOINT VALUE:
SEt2: Setpoint 2 value indication.
00.00: Value entering in counts within available model display range.
To access this menu from RUN mode, press ENTER key and while display shows
"Pro" press again ENTER for at least 3 seconds.
Display shows now "00" and '74' code must be introduced through SHIFT and UP
keys.
Finally press ENTER to validate configuration and back to RUN mode.
To access this menu from RUN mode, press ENTER key for at least 3 seconds.
Display shows now "CodE" and then "0000". Desired security code must be introduced
through SHIFT and UP keys (by default this code is 0000).
Finally press ENTER to begin with lock-out level configuration. If entered security code
is wrong, the instrument will go back to RUN mode.
www.ditel.es
JR-D / JR20-D
69