Publicidad
Idiomas disponibles
Idiomas disponibles
3.2. Working with the device
Automatic on/off:
The motor of this pressure washer does not run continuously. Only works when the
trigger of the spray gun is pressed. After following the start-up procedures described
in this manual, turn on the high-pressure cleaner and pull the trigger to start it.
Venting the device:
It is very important to vent the gun before using the pressure washer. Squeeze the
trigger to release the air trapped inside the machine and the hose. Continue
squeezing the trigger until a steady stream of water flows out. (This process may
take up to 2 minutes.)
Connection
1 - Pressure washer
2 - Water inlet hose (not included)
3 - Water connection (not included)
4 - Water inlet
Publicidad
