Publicidad
Idiomas disponibles
Idiomas disponibles
1. Press the "POWER" button to start the system. The default operating
mode is 50% humidity and low speed.
2. When the wind speed needs to be adjusted, press the FAN SPEED
button to obtain a calm, high or low wind speed. When the
corresponding indicator light is lit, the current wind speed has been set.
3. Press the up or down arrows on the humidity button to adjust the
humidity level. The humidity level is set between 35% and 80%, with
5% added and decreased each time.
4. Press the "MODE" button to select the following humidity functions :
LIVING SPACE (50%) BASEMENT (45%) CONTINUOUS MODE (55%).
The corresponding mode indicator light will come on.
5. When the dehumidifier is turned off, press the TIMER button to set the
timer. The TIMER indicator light will come on and the display will
initially show 0.5. Press the up and down arrows to set the time. To
cancel the timer function, press the timer button again.
When the dehumidifier is switched on, press the timer button to set the
timer stop function. Press the "UP" and "DOWN" buttons to set the
timer.
The timer range is set between 0.5-24 hours.
Press the timer button for 3 seconds to activate the key lock function.
The lock indicator light will come on and the other buttons will stop
working. Press the timer button again for 3 seconds to cancel the key
lock function. The lock indicator light goes out.
6. Press the DRIVE button to turn on the front panel display and press
again to turn off the front panel display. The front panel display is the
same as the top screen display.
7. When the dehumidifier has been running for a total of 250 hours, the
filter indicator light will come on, reminding you that the filter needs to
be cleaned. Clean the filter.
Once the filter has been cleaned, press the FILTER button and the filter
indicator light goes out.
8. To start the pump function, press the PUMP button. The PUMP indicator
light comes on.
73/85
Publicidad
