Publicidad
Idiomas disponibles
Idiomas disponibles
3. When replacing the water tank in the appliance, first place the suction
hose of the water pump in the square hole of the water tank cover
with your left hand and then press the drain tank firmly into position
with both hands.
CAUTION: Do not remove the float from the water tank. The water
level sensor will no longer be able to correctly detect the water
level without the float and water may run out of the water tank.
4. If the tank is dirty, wash it with cold or lukewarm water. Do not use
detergent, scouring pads, chemically treated dust cloths, gasoline,
benzene, thinner, or other solvents, as they can scratch and damage
the tank and cause water leakage.
5. When replacing the water tank, press firmly on the tank with both
hands. If the tank is not positioned correctly, the "TANK FULL" sensor
will be activated and the dehumidifier will not operate.
75/85
Publicidad
