Publicidad
6
1. You have two options for fastening the battery terminals:
by means of clamps (A) or washers (B), depending on the
type of battery. Connect the most suitable one to the
charger cable (C).
A
B
C
Start Up
2. Select the correct charging
voltage according to the nominal
voltage of the battery (e.g., for a
6 V battery select the 6 V
charging voltage).
3. Connect the red clamp or washer to the positive or
battery "+" and the black clamp or washer to the negative
of the battery " - " (D).
12 V
D
6 V
Publicidad
