Publicidad
8
Problem
Does not react when power is on.
The indicator lights up, but there is no AC
output.
The power indicator and fault indicator light
up at the same time.
Voltage indicator does not light up when the
charger is running.
The 6 V or 12 V indicator does not light up
when the charger is running.
6 V / 12 V do not light or are not sensitive.
Troubleshooting
Solution
1. Check if the battery charger is plugged into a good socket.
2. Does the plug have an AC outlet?
3. Go to a
1. Check that the clamp is properly connected.
2. Check if the terminal is sulfated.
3. Check if the clamp cable is broken.
4. Go to a
1. Check that the clamp is not connected backwards.
2. The charger was in overheat protection.
3. Incorrect battery voltage was selected.
4. Go to a
1. Go to a
replacement.
1. Incorrect operation when the switch is used.
2. Switch is damaged. Go to a
Service Center for service.
Authorized Service Center for service.
Authorized Service Center for service.
Authorized Service Center for service.
Authorized Service Center for
Authorized
Publicidad
