DeWalt DW089 Manual De Instrucciones página 27

2. Open the jaws of the clamp by turning the clamp knob (a1)
3. Position the detector at the height needed and turn the clamp
4. To make adjustments in height, slightly loosen the clamp,
Detector Cleaning and Storage
• Dirt and grease may be removed from the exterior of the
• The D
• The best storage place is one that is cool and dry—away from
Detector Service
Except for batteries, there are no user serviceable parts in the Digital
Laser Detector. Do not disassemble the unit. Unauthorised tampering
with the laser detector will void all warranties.
Detector Troubleshooting
THE DETECTOR WILL NOT TURN ON
• Press and release the power button.
• Check to see that the battery is in place and in the proper
• If the detector is very cold, allow it to warm up in a heated area.
• Replace the 9-volt battery. Turn the unit on.
• If the detector still does not turn on, take the detector to a D
DW089_DW089CG - User Manual - NA - May 2018.indd 25
counterclockwise.
knob clockwise to secure the clamp on the rod.
reposition, and retighten.
detector using a cloth or soft, non-metallic brush.
WALT digital laser detector is rain resistant but not
E
immersible. Do not pour water on the unit or submerge it under
water.
direct sunlight and excess heat or cold.
position.
service centre.
DW 0 8 9/ D W089CG
WALT
e
25
5/25/2018 10:40:49 AM
E