Lighting the Top Sear Burner
NOTE: Do not use the main burners when the top sear burner
is in use.
1.
Open the main burner cover. Do not light burners with the
cover on.
2.
Do not lean over the grill.
Push in and turn the grill control knob to "●", while
3.
continuing to hold it in.
IMPORTANT: If burner does not light immediately, turn the
burner knob to "○" and wait 5 minutes before relighting.
Manually Lighting the Top Sear Burner
1.
Open the hood completely. Do not light burners with the
hood closed.
2.
Do not lean over the grill.
3.
Remove the manual lighting extension (see the following
illustration) and attach a match to the split ring.
Using Your Top Sear Burner
4.
5.
6.
7.
12
Strike the match to light it.
Hold the lit match close to the top sear burner.
A
A.
Lighting extension
B.
Sear burner
Push in and turn the control knob to "●". For the burner
closest to the lit match. The burner will light immediately.
When burner is lit, turn knob to desired setting.
Remove the match and replace the manual lighting
extension on the right side panel.
IMPORTANT:
If burner does not light immediately, turn the burner
knob to "○" and wait 5 minutes before relighting.
If any burners do not light after attempting to light
them manually, contact the Customer Service Center.
See the ''Assistance'' section.
Using the Top Sear Burner
Grilling with Top Sear Burner produces a high heat which
quickly chars foods. Searing creates and locks in flavors on
the outside and creates a beautifully- browned surface and
texture. The result is a crisp, flavorful outside with a tender,
juicy inside.
◼
Lift the lid on the top sear burner.
◼
Check that the sear grill grate is in place before using the
side burner.
◼
Turn on the top sear burner and preheat for 5 minutes.
◼
Ensure that foods are fully thawed, and that excess fat is
trimmed off prior to searing.
◼
Place food on sear grate. Sear food for 1 to 2 minutes on
each side, then move the food to the main grill cooking
surface to finish grilling to desired doneness.
◼
Turn off the top sear burner and allow burner to cool down.
B