FUXTEC FX-RM4180 Manual De Instrucciones página 29

Original User Manual FUXTEC Petrol Lawnmower FX-RM4180
Essential instructions for assembling the mower
Before assembling and operating the petrol device, please carefully read the entire instruction
manual and the instructions.
IMPORTANT INFORMATION: The device is supplied WITHOUT FUEL AND OIL in the engine.
Your new device has been tested in the production facility, i.e., there may be a small amount of
residual oil in the engine or visible on the dipstick!
TAKE THE DEVICE OUT OF THE CARDBOARD BOX
Remove the device from the cardboard packaging and ensure no loose parts remain.
Assembly upper and lower tie bar
Carefully unfold the device's handle, taking care not to pinch or damage the control cables of the
device.
Insert the lower part of the handle (see the following illustration) into the corresponding hole on the
device (see arrow) and secure it with the two screws supplied - one screw with a washer on each side
of the handle.
29