Bona OptiSpread UX Manual De Funcionamiento página 20

8. Storage and Transportation
8.1. Proper Storage
Always store the device horizontally in the original packaging. The Bona OptiSpread UX
nozzle can remain on the machine during longer work breaks of up to 12 hours. Adhesive
film bags that are not completely emptied can also remain in the machine. To do this, clean
the nozzle from the outside with Bona Cleaning Wipes. In particular, the area where the
adhesive exits should be cleaned thoroughly. The teeth must then be covered with adhesive
tape, or the entire nozzle sealed airtight.
The machine can be stored or transported horizontally for up to 24 hours without the risk of
it drying out.
For longer storage (> 24 hours), the nozzle must be removed from the pipe. If there is still a
film bag, it must first be squeezed out or removed. The adhesive nozzle itself is designed as
a disposable nozzle and can be disposed of after the construction site has been completed.
If necessary, the nozzle can also be used several times.
Avoid long-term storage in damp or permanently wet as well as dusty places. If the machine
has been stored permanently or overnight at below +10°C, the machine must first be
acclimatized to the room climate (from +15°C) to ensure safe functioning of the piston.
8.2. Transportation
Always transport Bona OptiSpread UX in the original packaging provided. When
transporting, make sure that the machine is not damaged and secure it sufficiently
to avoid transport damage.
The included Li-ion batteries are subject to the requirements of dangerous goods
legislation. The batteries can be transported on the road by the user without any
further restrictions. When shipping by third parties (e.g. air transport or forwarding
agency), special requirements for packaging and labeling must be observed.
Here, a dangerous goods expert must be consulted when preparing the package.
Only ship batteries if the housing is undamaged. Tape open contacts and pack the
battery so that it does not move in the packaging. Please also note any additional national
regulations.
20
Operating manual