Wiesenfield MANUAL NEST BOX Manual De Instrucciones página 18

Assembly parts list
1 - Steel wire bracket (6 pcs.)
2 - Lower platform support (6 pcs.)
3 - Upper platform support (6 pcs.)
4 - Platform connecting element (12 pcs.)
5 - Floor board (24 pcs.)
6 - Rubber lining (24 pcs.)
7 - Divider (12 pcs.)
8 - Front panel (4 pcs.)
9 - Rear panel small (2 pcs.)
10 - Rear panel large (2 pcs.)
11 - Platform boards (6 pcs.)
12 - Top cover (2 pcs.)
13 - Side cover (8 pcs.)
14 - Support board (2 pcs.)
15 - Steel wire (1 pc.)
16 - Short screws (172 pcs) [not shown in the picture]
17 - Long screws (45 pcs.) [not shown in the picture]
18 - Washers (45 pcs.) [not shown in the picture]
19 - Nuts (219 pcs.) [not shown in the picture]
NOTE : The long screws and washers are used to install the platforms [11],
and the short screws are used to attach the remaining elements.