Schumacher Electric MC-1 Manual Del Usuario página 9

PROBLEM
Charger Transformer laminations
makes a loud vibrate.
buzz or hum.
The charger Circuit breaker is cycling
is making an
audible clicking
sound. Battery is defective.
Shorted battery cables or
clamps.
The battery is Charger clamps are not
connected and making a good electrical
the charger is connection.
on, but is not
charging.
or call 1-800-621-5485, Monday-Friday 7:00
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE
AUTHORIZATION (RMA) number from Customer Service at Schumacher
Electric Corporation.
Input Voltage ................................................................. 120V AC
Output Voltage .......................................................................6V DC or 12V DC
Output Current Rating ....................................................................................1A
Ring connectors (quick-connect) ................................................... 2299001950
Battery clamps (quick-connect) ...................................................... 3899001235
POSSIBLE CAUSE
BEFORE RETURNING FOR REPAIRS
For information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
SPECIFICATIONS
REPLACEMENT PARTS
REASON/SOLUTION
No problem; this is a normal
condition.
The settings may be wrong. Check the
charger settings.
Check the battery.
Circuit breaker cycles when the
current draw is too high. Check for
shorted cables or ring terminals and
replace if necessary.
Check for poor electrical connections
at battery and car frame. Make sure
the connecting points are clean. Rock
the clamps back and forth to ensure
a better connection.
am
• 9 •
to 5:00 CST
pm
60Hz, 0.2A
@