Hama Mini Instrucciones De Uso página 3

G Operating instruction
Controls and displays
1. LCD display
2. CLOCK button
= Display current time / Change 12/24-hour
format / Change daylight saving time
3. C.D. button
= Start/stop countdown during AUTO mode
4. RND button
= Start/stop random mode during AUTO mode
5. ON/OFF button
= Switching between the operating modes
(ON/ AUTO/ OFF)
6. SET button
= Con rmation of the setting value / Setting the
weekday and time
7. + button
= Increase the current setting value / change the
programming mode
8. V– button
= Decrease current setting value / change the
programming mode
9. RESET button
= Reset to factory setting
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the
device, please pass these operating instructions on to
the new owner.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
Warning
This symbol is used to indicate safety instructions or
to draw your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
• "Mini" digital weekly timer
• These operating instructions
3. Safety instructions
• Never connect the timer to an extension cable or
adapter. Instead only connect it directly to the power
socket since otherwise overheating can occur.
2
• The product is intended for private, non-commercial
use only.
• Use the product only for the intended purpose.
• Do not operate the product outside the power limits
given in the speci cations.
• The maximum connected load is 1800 Watt (resistive
load). In the event of an overload, there is a risk of
destroying the timer.
• Protect the product from dirt, moisture and
overheating and use it in dry environments only.
• Do not drop the product and do not expose it to
any major shocks.
• As with all electrical products, this device should be
kept out of the reach of children.
• Dispose of packaging material in accordance with
the locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Never connect multiple units of this product in
series.
• Do not use any heat-generating devices (such as
electric blankets, coffee machines, etc.) with this
product. There is a risk of re and injury.
• Do not use this product with any devices that are
motorised or any devices that have a rotating
component or tool. There is a risk of injury.
• The product is intended only for use inside buildings.
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Only use the article under moderate climatic
conditions.
• Do not use the product in areas in which electronic
products are not permitted.
• Do not use the product in a damp environment and
avoid splashing water.
• Avoid storing, charging and using in extreme
temperatures and at extremely low atmospheric
pressures (such as at high altitudes).
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the
batteries/rechargeable batteries.
• The product must only be operated on a supply
network as described on the type plate.
• Use the timer only in permanently installed wall
sockets.
Risk of electric shock
• Do not open the device or continue to operate it
if it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains cable
are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
quali ed experts.