Hisense HRF254N6DSE Manual De Instrucciones página 13

Freezer Temperature Control
Press the "Freezer" button to change
the freezer temperature. When you
press the button continuously, the
temperature will be set in the following
sequence.
7°F 6°F
-11°F
If the temperature is switched to Celsius,
it will be displayed circularly from -14°C
to -24°C as shown in the figure below.
-14°C -15°C
-24°C
If you want to decrease the time needed
to freeze products in the freezer, press and
hold the "Freezer" button for 3 seconds.
The Super Freeze icon " " will illuminate
and the freezer temperature setting will
display -11°F(-24). Super Freeze can
quickly lower the temperature and freeze
your food faster than usual. This can
retain more of the vitamins and nutrients
in fresh food and keep our food longer.
The Super Freeze mode allows you to
freeze items inside with maximum speed.
We recommend that you let the
appliance operate for 6 hours first.
Super Freeze automatically switches off
after 52 hours, and the freezer
temperature setting will revert back to
the previous setting.
When the Super Freeze function is on,
press and hold the "Freezer" button more
than 3 seconds to turn it off. "Super
Freezer" will be off and the temperature
will revert back to the previous setting.
Fridge Temperature Control
You can touch the "Fridge" button to
change the fridge temperature. When
you touch the button continuously, the
temperature will be set in the following
sequence.
46°F 45°F
36°F
If the temperature is switched to Celsius,
it will be displayed circularly from 8°C to
2°C as shown in the figure below.
8°C 7°C
2°C 3°C
If you want to decrease the time needed
to cool products in the Fridge, touch and
hold this button for 3 seconds. The Super
.........
-10°F
.........
-23°C
.........
37°F
6°C 5°C
4°C
Cool icon " " will illuminate and the fridge
temperaure will display 36°F(2°C).
Super cool automatically switches off after
3 hours, and the refrigerator temperature
setting will revert back to the previous setting.
When the Super Cool function is on, you
can touch the " " button again to
switch it off. The fridge will not retain the
Super Cool function when powered off.
Eco
Touch the Eco button to turn Eco on and
off. When you turn Eco mode on, the
Eco icon " " will light up.
The temperature of the fridge is
automatically switched to 43°F(6°C) and
the freezer to 1°F(-17°C). When entering
Eco mode, "Super Cool" and "Super
Freeze" mode will turn off.
Water Filter Indicator
In general, you should change the water
filter every 6 months to ensure the highest
possible water quality.
After the refrigerator has dispensed about
300 gallons of water, the filter icon " " will
blink, reminding you to replace the water
filter.
First of all, purchase a new water filter. You
can purchase the new filter from the retailer
where you purchased your refrigerator or
the Hisense after-sales service system.
Make sure that the new filter is the same
filter type that came with your fridge and
can be correctly used in your refrigerator.
After you change the water filter, touch and
hold the "Eco" buttons for 3 seconds to
make the blinking stop. When you replace
the water filter, some water may leak from
the filter and lines. Please let the water flow
into a pan and wipe up any leakage that
may have occurred.
°F/°C
When the Child Lock is off, you can touch
the "°F/°C" button to switch between
Celsius and Fahrenheit units. The default
state is Fahrenheit display. When it is
switched to Fahrenheit, the icon " " will
be on.
13