Publicidad
Idiomas disponibles
Idiomas disponibles
Installing Your New Appliance
Before using the appliance for the first time,
you should be informed of the following tips.
WARNING
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height
as the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not casters,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage
your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
around the appliance for the dissipation
of heat. For this reason, sufficient clear
space should be available around the
refrigerator.
Suggestion:
It is advisable for there to be at least
2"(50mm) of clearance from the back of
the fridge to the wall, at least 1/2"(12mm)
of clearance from its top, at least 1/2"
(12mm) from its side to the wall and a
clear space in front to allow the doors
to open 125°, as shown in the following
diagram.
2"
1/2"
Note:
This appliance performs well within the
climate class from N to T shown in the table
below. It may not work properly if left at a
temperature above or below the
indicated range for a long period.
Climate class
SN
N
SN
T
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
1/2"
1/2"
Ambient temperature
+50°F to + 90°F
+61°F to + 90°F
+61°F to + 100°F
+61°F to + 109°F
5
Publicidad
