4.
When your nipples feel the suction power in any mode and at any suction level, press "+" or "-"
to adjust the suction to a comfortable level. There are 9 suction levels to choose from.
5.
Press the "+" and "-" buttons on the left side together to lock the buttons and prevent acciden-
tal activation or adjustment. To mute or unmute the control panel, press "+" and "-" on the right
side simultaneously. When the child lock is enabled and the panel is muted, the status icons " "
and "
" remain visible; otherwise, these icons become invisible.
6.
While the pump unit is pumping, long press the user mode button "
status icon "
" will blink to show that it is recording your pumping process. When you're done
recording, long press the user mode button "
personalize and save your own pumping process. To repeat the saved pumping process,
activate user mode by short pressing the user mode button "
run the saved pumping process automatically. If no saved pumping process can be detected,
it will beep and exit user mode after short pressing the user mode button "
7.
When finished pumping, long press the power button "
the pump will shut off automatically after 30 minutes of pumping if no further operation.
" to stop recording. You can use this function to
" and the pump will detect and
" to turn off the pump. Alternatively,
- 07 -
" to begin recording; the
".