besrey XN/MS-2246A Manual Del Usuario página 13

The diaphragm and diaphragm cap do not come in contact with milk and should only be cleaned
as needed.
Washable
Be careful not to get diaphragm and diaphragm cap to come in contact with milk. If there are
milk droplets inside these parts, stop pumping immediately to avoid getting milk droplets inside
the pump unit. Then clean these parts with water only and let them dry completely before using
them again.
Warning: Do not use diaphragm, and diaphragm cap until completely dry.
How to Assemble the Breast Pump
Step 1. Assemble components on the breast shield body: ① Insert the flange into the breast
shield body. ② Put the diaphragm into the breast shield body, then secure the diaphragm cap
onto the breast shield body.
- 10 -