Linea Domo DO636K Manual De Instrucciones página 29

PROBLEMS AND SOLUTIONS
Problem
The appliance does not work.
The appliance has been stopped working.
"F" flashes on the display.
The appliance does not heat enough.
ENVIRONMENTAL GUIDELINES
www.domo-elektro.be
This symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it must be brought to
the applicable collection point for recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.
Solution
- Make sure the connection plug has been
connected correctly.
- Check if the appliance works if you use another
socket.
- After 1.5 h, the appliance shuts off automatically.
Let the appliance cool down for 10 min. and press
again the on/off button.
- Did you first insert the plug into the socket and
then insert the connector plug into the device?
You must always insert the connector plug first,
and then plug the other end into the electrical
socket.
- Did the connector plug accidentally come off
while using the device? Remove the plug from the
electrical socket first, then reattach the connector
plug to the device, and then plug the cable back
in.
- After +/- 15 min. the appliance reaches the
set temperature. Increase the temperature if
necessary.
29
DO636K