Publicidad
Idiomas disponibles
Idiomas disponibles
CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fill in dates as you
complete regular
service.
Check Engine Oil Level
Change Engine Oil
Tighten All Screws and
Nuts
Check and Clean Spark
Plug
Replace Spark Plug
Clean and Inspect
Spark Arrestor
Lubricate Chute Control
Flange
Check Fuel
Check Adjustment of
Auger Control Cable
GENERAL RECOMMENDATIONS
The warranty on this snow thrower does
not cover items that have been sub-
jected to operator abuse or negligence.
To receive full value from the warranty,
the operator must maintain the snow
thrower as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
snow thrower.
Maintenance, replacement, or repair of
the emission control devices and sys-
tems can be performed by any non-road
engine repair establishment or individu-
al. Regular maintenance will improve the
performance and extend the life of the
engine.
WARNING: Do not strike the
flywheel with a hammer or a
hard object. If done, the fly-
wheel can shatter during operation.
Do not tamper with the governor
spring, links or other parts to in-
crease engine speed.
AFTER EACH USE
•
Run the machine to clear the auger
of snow.
1740309SM
MAINTENANCE
Before
Every
Each
Use
Hours
Often
√
√
√
√
Every
Every
8
25
50
Hours
Hours
√
√
√
√
√
•
To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
•
Check for any loose or damaged
parts.
•
Tighten any loose fasteners.
•
Check and maintain the auger.
Check controls to make sure they
•
are functioning properly.
•
If any parts are worn or damaged,
replace immediately.
LUBRICATION BEFORE STORAGE
Lubricate chute
control flange. Lubricate
flange with a clinging type
grease such as Lubriplate.
18
Every
Each
100
Season
Storage
Hours
√
Figure 15
Before
√
Publicidad
