Samsung 6+ Serie Manual De Instrucciones página 22

Basic Features
1. Purchase a CI CAM module at your nearest dealer or by
phone.
2. Firmly insert the "CI or CI+ CARD" into the CAM in the
direction of the arrow.
3. Insert the CAM with the "CI or CI+ CARD" into the
common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.
Wireless Remote Control
Turn wireless remote controls on or off or give permission to
wireless remote controls.
¦ Picture In Picture (PIP)
PIP
t
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
✎
NOTE
x
For PIP sound, refer to the Sound Select
instructions.
x
If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
x
You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
x
While Internet@TV is in operation, the PIP function
cannot be used.
x
PIP settings
Main picture
Component, HDMI1/DVI,
HDMI2, HDMI3, HDMI4,
PC
■ PIP (Off / On): Activate or deactivate the PIP function.
■ Channel: Select the channel for the sub-screen.
■ Size (Õ / Ã ): Select a size for the sub-picture.
■ Position (à / – / — / œ): Select a position for the
sub-picture.
■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
22
English
[XC]BN68-02807A-00L09.indb 22
Self Diagnosis
✎
Self Diagnostic might take few seconds, this is part of
the normal operation of the TV.
■ Picture Test (Yes / No): Use to check for picture
problems.
■ Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
✎
✎
■ Signal Information: (digital channels only) HDTV
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or by network connection or downloading the latest
firmware from "www.samsung.com," to a USB memory
device.
Current Version the software already installed in the TV.
✎
Software is represented as "Year/Month/Day_Version".
Sub picture
TV
Support Menu
If you hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the
If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
Software Upgrade
Current Version 2010/01/18_000001
By USB
By Online
By Channel
Standby Mode Upgrade : Off
Alternative Software 2010/01/15_00000
U Move E Enter R Return
MUTE button.
►
2010-03-26 오후 7:36:29