Samsung 6+ Serie Manual De Instrucciones página 39

t
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV's remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theatre
TV Rear Panel
1. Connect the HDMI IN (1(DVI), 2, 3
using an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎
NOTE
x
Connect the Optical cable between the
on the Home Theatre.
x
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theatre's Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL)
Amplifier or Home Theatre, not the TV.
x
You can connect only one Home Theatre.
x
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
x
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
x
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
[XC]BN68-02807A-00L09.indb 39
Anynet+
Home Theatre
Optical Cable
HDMI Cable
HDMI Cable
or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device
DIGITAL AUDIO OUT (OPTICAL)
jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Anynet+ Anynet+ Device
Device 1
HDMI Cable
jack on your TV and the Digital Audio Input
2, 3, 4
39
English
2010-03-26 오후 7:36:49