Replace the cartridge of the pen
The cartridge compartment can contain up to two replacement
cartridges. When the ink cartridge is running out of ink or you
want to use a dummy cartridge, you can replace the old cartridge
with a new one.
1
Open the cartridge compartment cover.
Slide open the cartridge compartment cover
on the lower right side of the digital pad. Inside
the compartment you can find two replacement
cartridges.
2
Pull out the old cartridge.
Insert the pen tip into the clip hole in the cartridge compartment.
Tilt the pen to grip the pen tip, and then gently pull out the old
cartridge. Or you can use the accessory tweezers to pull out the
old cartridge.
3
Insert a new cartridge.
Insert a new ink/dummy cartridge and gently slide the cartridge
into the pen. Carefully press the cartridge tip against a hard
surface until the cartridge clicks into place.
When inserting the cartridge, do not use force. A successful
insertion should leave a buffer space for the pen tip to "bounce"
back after being pressed.
or
11