Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
No visible
aerosol
when power
source is
functioning
If above remedies do not work, call your local supplier.
ELECTROMAGNETIC SUSCEPTIBILITY
This device meets the requirements of IEC/EN60601-1-2
which
describes
compatibility (EMC) of medical devices. This includes
immunity to radio frequency electric fields and electrostatic
discharge, in addition to the other applicable requirements
of the standard. Compliance with EMC standards does not
mean a device has total immunity; certain devices (cellular
phones, pagers, etc.) can interrupt operation if they are used
near medical equipment.
Check
Check that the
AC/DC Adapter is
not faulty.
Check that there is
medication in the
Medication Cup.
Check that the
nebulizer has been
properly cleaned.
requirements
Remedy
Try to operate the
Control Module
by using batteries
instead of the
AC/DC Adapter. If
the Control Module
functions properly
with batteries but
not with the AC/DC
adapter, replace the
AC/DC Adapter.
Fill the Medication
Cup with prescribed
medication.
Clean the
Aeroneb
Go. Refer
®
to page 11.
for
electromagnetic
15
Publicidad
