Stealth Products MTHW-620 Manual De Usuario página 10

Adjustment
Operation
MTMD-42 Adjustable Abductor
Stealth's adjustable medial pad allows
Compatible with MTHW-600,
adjustment in multiple angles and planes. It
MTHW-610, & MTHW-620
comes standard with dual 3x5" pads and slip
This adjustment screw allows you
cover.
to change the angle of the pads.
The MTMD-42 mounts onto a height adjustable
mounting bracket. (linking hardware does not
utilize this bracket)
When mounting on linking hardware, the
MTMD-42 utilizes an adapter like the one below
to attach to the links.
The pads connect to the planar mount with
tracks and track nuts. This allows the pads to be
adjusted forward or rearward on the planar
mount.
The height and depth are adjustable, and the
angle of the pads can be adjusted independently
to meet most asymmetrical medial positioning
needs.
Making Adjustments:
To adjust the pad on the planar mount, loosen the two screws that secure the pad to the
mount. Slide the pad to the new position and tighten the two screws.
To adjust the angle of the abductor pads, loosen the screw located at the pivot point of
the two pads. Move each pad into its new position, and tighten the screw to secure the
new angles.
To adjust the depth of the pommel, loosen the two screws that secure the abductor to
the mount and move it to the desired position. Tighten the screws to lock in the new
setting.
To adjust the height of the hardware, follow the instructions for "Height Adjustable
Hardware" located earlier in this manual.
As in all cases, be careful not to overtighten screws.
5 EN