Picture is not Clear
If the picture from the camera is not clear, please try the following
solutions:
• Check the camera dome cover for dirt, dust or spiderwebs, please clean
the dome cover with a soft, clean cloth.
• Point the camera to a well-lit area, the lighting condition will affect the
picture quality a lot.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check out again.
Specification
Hardware Features
Infrared Night Vision: Up to 30 meters
Day/Night Mode: Auto switchover
Angle of View: Horizontal: 90°~31°, Vertical: 67°~24°
General
Dimension: Φ133x100 mm
Weight: 685g
Operating Temperature: -10°C~+55°C (14°F~131°F)
13
English
Operating Humidity: 10% ~ 90%
For more specifications, visit https://reolink.com/.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: The following notes are only for WiFi camera. This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation.If this equipment does cause harmful
interference to radio or television, reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
English
14