Publicidad
Idiomas disponibles
Idiomas disponibles
19.
To avoid damages to the pump, never operate the pressure washer without water, even if for a short pe-
riod.
20.
Prevent children from getting in contact with packaging, accessories and product parts.
21.
Children being supervised not to play with the appliance
22.
Because of the thrust forces, when using the product, hold the trigger gun firmly.
23.
If in doubt regarding the correct operation or in presence of any equipment abnormality, suspend the use
immediately and contact the nearest SCHULZ AUTHORIZED DEALER.
24.
The electric supply connection made by a qualified electrician and complies with IEC 60364-1 (IEC60335-2-
79/A1:2004).
25.
The symbols
mean that the product has double insulation, which provides more safety against electric
shocks.
26.
SCHULZ is not responsible for damages or consequences of the improper use of this equipment.
27.
Water with impurities and dirt damages your pressure washer. Use only clean water.
28.
Do not use the equipment if an electrical cable or important parts from the device are damaged, for example,
security devices, high pressure hoses, lance trigger, etc
29.
Due to the jet exiting the high pressure nozzles (0 °, 15 ° and 45 °), a recoil force acts on the pistol. Therefore,
firmly hold the gun and nozzle.
30.
The equipment meets stability requirements during use, transportation, assembly, disassembly when out of
service, foreseeable testing or malfunctions.
31.
ATTENTION: Water flowing through preventive reflux is considered non-potable.
32.
ATTENTION: Always turn off the power switch when leaving the machine.
33.
ATTENTION: Always that the trigger is activated, the pistol has a recoil force. Therefore, hold the
pistol firmly.
Note:
The electrical network must not present voltage variations superior to +/- 10%.
The voltage drop resulting from the start peak must not be superior to 10%.
For your safety, the flexible power cord offers a plug with ground pin. Other product has double insulation.
THE CUSTOMER IS RESPONSIBLE FOR EXPENSES RELATED TO THE INSTALLATION AND ACCESSORIES.
IMPORTANT
Attention: Safety devices protect the user and cannot be changed or deleted. Machine switch: The machine
switch prevents the inadvertent actuation of the equipment. Safety Locking Pistol: With this system, a
person unprepared cannot trigger the equipment and use it incorrectly. TOTAL STOP System: If you release
the gun trigger, the high pressure is turned off by a switch pressure If the trigger is pulled the pump, the pump
turn on again.. Security Inspection: You can establish with your dealer an agreement for an inspection and
periodic maintenance of its equipments. Safety device: Your equipment is equipped with a safety / relief val-
ve with bypass valve. When closing the pistol (releasing the trigger) the bypass valve opens instantly allowing
recirculation water while preventing a buildup of pressure that could damage your equipment. This system is
factory preset and cannot be manipulated.
WARNING: Safety Equipment
28
Always use filter.
Publicidad
