Descargar Imprimir esta página

Flama 2326FL Manual De Instrucciones página 20

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING TIPS
If your fan heater unexpectedly shuts
down or stops working, this could be due
to activating one of the aforementioned
safety features to prevent overheating.
Make sure the power plug is plugged into a
working electrical outlet.
Check thermostat settings. The fan heater
may be off because it has reached the
desired fixed temperature.
NOTE: In order to avoid overheating, do not
cover the appliance.
CLEANING AND MAINTENANCE
WARNING: Always disconnect the plug
before moving or repairing the appliance.
Cleaning:
IMPORTANT! DO NOT IMMERSE THE
VENTILATOR IN WATER! Clean the fan
heater grilles with your vacuum cleaner
brush attachment. This will remove lint and
dirt from the inside of the heater.
DO NOT ATTEMPT TO DISASSEMBLE THE
VENTILATOR.
Clean the outside of the fan heater with a
soft cloth.
DANGER: Do not use gasoline, benzine,
thinner, abrasive cleaning fluids, etc. as
these will damage the fan heater. NEVER
USE ALCOHOL OR SOLVENTS.
STORAGE
Store the fan heater together with these
instructions in the original box in a cool, dry
place.
18
ANOMALIES AND REPAIR
In case of malfunction, please take the
appliance to an authorized Technical
Assistance Service. Do not attempt to
disassemble or repair the appliance, as this
may be dangerous.
PROTECTING THE ENVIRONMENT
use, recycling and other forms of recovery
in order to reduce its negative effects on
the environment.
When it is no longer in use, this appliance
must not be disposed of together with
other unsorted municipal waste.
The user is responsible for delivering it
free of charge to the selective collection
facilities available for that purpose.
Pieces of equipment that are no longer in
use can also be taken back at points of sale,
by purchasing new pieces of equipment
that are equivalent and have the same
functions.
For more detailed information on collection
points, please contact your City Council or a
point of sale for this equipment.
www.flama.pt
This symbol indicates the
separate collection of electrical
and electronic equipment.
The main objective of the
separate collection of this
waste is to reduce the quantity
to be disposed of, promote re-

Publicidad

loading