Descargar Imprimir esta página

STARFRIT 024735 Instrucciones De Uso Y Mantenimiento página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

STEAM COOK
• In ACTIVE mode, press the STEAM COOK button, the STEAM COOK display light and LED
display on panel showing 0 minutes will be flashing giving you a window or ADJUST TIME
and/or to select DELAY TIME if needed. Once it beeps, the lights will turn solid, LED will
show ON and water will start heating. Once boiling, it will beep and the adjusted timer
countdown will begin. After the countdown is complete, it will beep and automatically
switch to STANDBY mode.
Note: The cooking time can be adjusted manually.
Time ranges from 0 minutes to 60 minutes. Time is adjusted in increments of 1 minute.
Holding the STEAM COOK function will speed up the process of adding time.
Note: The STEAM COOK function timer must be set before selecting and setting DELAY
TIME function timer.
HEAT/SIMMER
• In ACTIVE mode, press the HEAT/SIMMER button, the HEAT/SIMMER display light and LED
display on panel showing 5 minutes will be flashing giving you a window or ADJUST TIME
and/or to select DELAY TIME if needed. Once it beeps, the lights will turn solid, LED will
show ON and water will start heating. Once boiling, it will beep and the adjusted timer
countdown will begin. After the countdown is complete, it will beep and automatically
switch to KEEP WARM.
Note: The cooking time can be adjusted manually.
Time ranges from 5 minutes to 5 hours. Between 5 and 90 minutes, time is adjusted
in increments of 1 minute; between 90 minutes and 2 hours, time is adjusted in increments
of 30 minutes; between 2 and 5 hours, time is adjusted in increments of 1 hour. Holding
the HEAT/SIMMER function will speed up the process of adding time.
Note: The HEAT/SIMMER function timer must be set before selecting and setting
DELAY TIME function timer.
WARM/POWER
Power
• While on STANDBY mode, first, press the WARM/POWER button to put it in ACTIVE mode,
then select the desired function. At any time during the cooking process of any functions,
pressing the WARM/POWER will bring back into STANDBY mode.
Note: ACTIVE mode opens a 15 second window for you to select a cooking function,
after 15 seconds, it will automatically revert to STANDBY mode.
Warm
• While in ACTIVE mode, pressing the WARM/POWER button will enter in KEEP WARM
mode. KEEP WARM time cannot be adjusted and after the beep it will display in hours,
the time that it has been keeping warm for up to 12 hours. After 12 hours, it will revert
to STANDBY mode.
7

Publicidad

loading