DELAY TIME
• In ACTIVE mode, select the desired COOKING FUNCTION first, following by DELAY TIME
button to enter the DELAY TIME function. In the DELAY TIME function, the display light
of selected function DELAY TIME and LED displays on panel shows 0 MINUTES will be
flashing. While flashing, the DELAY TIME timer can be adjusted in increments of 1 hour
ranging from 1 to 15 hours.
Note: For functions that have adjustable timers, the function timer must be set before
selecting DELAY TIME function.
• Keep pressing the DELAY TIME button to add time. Holding the DELAY TIME button will speed
up the process of adding time. The function DELAY TIME and TIME indicator lights will flash.
Once it beeps, the previously mentioned lights with turn solid and the set DELAY TIMER will
begin countdown. Once DELAY TIMER countdown is completed the selected function timer
countdown will begin. Once the function timer is up, it will beep and go into keep warm mode.
BEFORE INITIAL USE
READ THE INSTRUCTIONS BEFORE FIRST USE
1.
Remove and discard any packaging, sticker, or promotional labels/materials before first use.
2.
Open the lid using the lid handle.
3.
Remove the Cooking Pot, the Steamer Basket, the Removable Lid Liner and wash in hot
soapy water with all other accessories. Dry thoroughly.
WARNING: DO NOT immerse body, electrical cord or plug in water or any other liquid.
4.
Wipe the lid with a damp cloth and dry thoroughly.
5.
Wipe body with a damp cloth and dry thoroughly.
6.
Reassemble the appliance.
Note: ALWAYS ensure the Removable Lid Liner is properly reinstalled under the lid.
NOTE: During first use of the appliance, smoke or light vapors may occur from the appliance
because of the initial warming process of the materials. This is normal and will quickly disappear.
HOW TO USE
READ THE INSTRUCTIONS BEFORE USE
NOTE: ALWAYS use plastic, rubber, wooden, or silicone cooking utensils inside the Cooking Pot
to avoid scratching the cookware.
NOTE: DO NOT operate the appliance directly under kitchen cabinets. Provide adequate space
above and around the appliance for air circulation.
NOTE: Before each operating, ensure the steam release valve is properly installed. Ensure the lid
is tightly closed before operating.
8