Waferlock L701 Guia Del Usuario página 10

WAFERLOCK CORPORATION
Delete All User Cards / Tags
 Step 1
Press any button to activate the keypad, then press
 Step 2
Enter current Master Pin Code, then press #.
 Step 3
Re-enter Master Pin Code, then press #.
Note
• When all User Card and Pin Code are deleted, the lock will be reset to default setting.
Master Pin Code will be reset to 123456.
• If the lock was in Dual Mode or Toggle Mode, it will also be set back to Standard + Single Mode.
Reset the lock to default
3 #.
Correct Master Pin Code: 1 beep followed by green
light ashing 1 time.
Incorrect Master Pin Code: 2 beeps followed by red
light ashing 2 times, then standby.
Correct Master Pin Code: 1 beep followed by green
light ashing 1 time.
Incorrect Master Pin Code: 2 beeps followed by red
light ashing 2 times, then standby.
8