Waferlock L701 Guia Del Usuario página 3

CONTENT
P02 Main Feature
Technical Speci cation
P03 Change Master Pin Code
P04 Lock set up with App
STANDALONE MODE PROGRAMMING INSTRUCTION
P05
Program New User Cards / Tags
P06
Program New Pin Code
P07
Delete Individual User Cards / Tags
P08
Delete All User Cards / Tags
P09
Set Up The Lock As Toggle Mode / Set Up The Lock As Standard Mode
P10
Set Up The Lock As Dual Mode / Set Up The Lock As Single Mode
P11
Combination Of Lock Modes / Reset The Lock Master Code
P12
Open Door With User Card / Open Door With Pin Code
P13
Low Power Warning / Emergency External Power Supply
P14 Serial No. / Name List
Your Warranty
Your Warranty covers all manufacturers' defects in workmanship and material. It does not cover any unit that is damaged beyond normal
usage, by improper installations, by contacts to chemicals, or any other acts or omissions unsanctioned within the user manual.
All components are covered for one (1) year after the date of purchase or installation from supplier.
The user is required to provide dated proof of purchase. Waferlock or its authorized distributor will determine if there is a warrantable
condition associated with material and/or manufacturing workmanship.
If the lock conforms to the warranty conditions, the lock will be repaired free of charge. The shipping freights would be at owner's expense.
The warranty does not include any further obligation whatsoever, including but not limited to the installation of the replacement unit to the
customer's lock.
All other warranties, express or implied, are disclaimed. All collateral agreements, which purport to modify this limited warranty, are of no
effect.
CE Marking
This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking. The CE
Mark is a conformity marking consisting of the letters "CE". The CE Mark applies to products regulated by certain European health, safety
and environmental protection legislation. The CE Mark is obligatory for products it applies to: the manufacturer af xes the marking in order
to be allowed to sell his product in the European market.
This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain CE Marking.
The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product. Secondly, CE Marking is
mandatory for the product it applies to, whereas most quality markings are voluntary.
1
WAFERLOCK CORPORATION