4.4 Preparing the appliance
for the first time
Remove the informative material.
1.
Remove the protective foil and
2.
transit bolts, e.g. remove the ad-
hesive strips and carton.
Clean the appliance for the first
3.
time. → Page 22
4.5 Connecting the appliance
to the electricity supply
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. → Fig.
Check the mains plug is inserted
2.
properly.
a The appliance is now ready for
use.
5 Familiarising yourself
with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→ Fig.
1
Refrigerator compartment
A
→ Page 20
Freezer compartment
B
→ Page 20
Control panel → Page 15
1
Lighting
2
Bottle shelf → Page 16
3
Interior ventilation opening
4
/
1
6
Familiarising yourself with your appliance en
Temperature controller (stor-
5
age container) → Page 18
Rating plate → Page 28
6
Storage container
7
→ Page 16
Fruit and vegetable container
8
with humidity control
→ Page 16
Frozen food container
9
→ Page 23
Screw foot
10
Door storage compartment
11
for large bottles → Page 17
Note: Deviations between your appli-
ance and the diagrams may differ
with regard to their features and size.
5.2 Control panel
You can use the control panel to con-
figure all functions of your appliance
and to obtain information about the
operating status.
→ Fig.
2
1
is switched on.
The temperature setting but-
2
ton (refrigerator compartment)
sets the temperature of the
refrigerator compartment.
(Refrigerator compart-
3
ment) lights up when Super
cooling is switched on.
Displays the set temperature
4
for the refrigerator compart-
ment in °C.
(Refrigerator compart-
5
ment) lights up when the en-
ergy-saving mode in the refri-
gerator compartment is
switched on.
lights up when the alarm
15